Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
System Maintenance Commands
15-29
v1.0, February 2007
15.5.1 script apply
This command applies the commands in the script to the switch. The
<scriptname>
parameter is the name of the script to apply.
Format
script apply
<scriptname>
Mode
Global Config
15.5.2 script delete
This command deletes a specified script where the
<scriptname>
parameter is the name
of the script to delete. The
<all>
option deletes all the scripts present on the switch.
Format
script delete
{<scriptname> | all}
Mode
Global Config
15.5.3 script list
This command lists all scripts present on the switch as well as the remaining available
space.
Format
script list
Mode
Global Config
Configuration
Script
Name of the script.
Size
Size of the script.
15.5.4 show script
This command displays the contents of a script file, which is named
<scriptname>
.
Format
show script
<scriptname>
Mode
Global Config
Output Format
line
<number>: <line contents>
15.5.5 script validate
This command validates a script file by parsing each line in the script file where
<scriptname>
is the name of the script to validate.The validate option is intended to be
used as a tool for script development. Validation identifies potential problems. It might not
identify all problems with a given script on any given device.
Summary of Contents for GSM7224 - Switch
Page 4: ...v1 0 February 2007 iv...
Page 20: ...xx v1 0 February 2007...
