Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Spanning Tree Protocol Commands
5-5
v1.0, February 2007
5.1.8.1 no spanning-tree forward-time
This command sets the Bridge Forward Delay parameter for the common and internal
spanning tree to the default value of 15.
Format
no spanning-tree forward-time
Mode
Global Config
5.1.9 spanning-tree hello-time
This command sets the Admin Hello Time parameter to a new value for the common and
internal spanning tree. The hello time
<value>
is in whole seconds within a range of 1 to
10, with the value being less than or equal to
(Bridge Max Age / 2) - 1
.
Default
2
Format
spanning-tree hello-time <1-10>
Mode
Interface Config
5.1.9.1 no spanning-tree hello-time
This command sets the admin Hello Time parameter for the common and internal
spanning tree to the default value.
Format
no spanning-tree hello-time
Mode
Interface Config
5.1.10 spanning-tree max-age
This command sets the Bridge Max Age parameter to a new value for the common and
internal spanning tree. The max-age value is in seconds within a range of 6 to 40, with the
value being less than or equal to
2 x (Bridge Forward Delay - 1)
.
Default
20
Format
spanning-tree max-age
<6-40>
Mode
Global Config
5.1.10.1 no spanning-tree max-age
This command sets the Bridge Max Age parameter for the common and internal spanning
tree to the default value of 20.
Format
no spanning-tree max-age
Mode
Global Config
Summary of Contents for GSM7224 - Switch
Page 4: ...v1 0 February 2007 iv...
Page 20: ...xx v1 0 February 2007...
