Administration
83
N300 Wireless Gigabit Router with USB JNR3210
Set Password
This feature allows you to change the default password that is used to log in to the router with
the user name
admin
.
This is not the same as changing the password for wireless access. The label on the bottom
of your router shows your unique wireless network name (SSID) and password for wireless
access (see
Label
on page
11).
To set the password for the user name admin:
1.
Select
Advanced > Administration > Set Password
to display the following screen:
2.
Type the old password, and type the new password twice in the fields on this screen.
3.
If you want to be able to recover the password, select the
Enable Password Recovery
check box.
4.
Click
Apply
so that your changes take effect.
Password Recovery
NETGEAR recommends that you enable password recovery if you change the password for
the router’s user name of admin. Then you will have an easy way to recover the password if
it is forgotten. This recovery process is supported in Internet Explorer, Firefox, and Chrome
browsers, but not in the Safari browser.
To set up password recovery:
1.
Select the
Enable Password Recovery
check box.
2.
Select two security questions, and provide answers to them.
3.
Click
Apply
to save your changes.
When you use your browser to access the router, the login window displays. If password
recovery is enabled, when you click Cancel, the password recovery process starts. You can
then enter the saved answers to the security questions to recover the password.
