Chapter 8. Setup
|
33
NeoTV 350 HD Media Player (NTV350)
Audio Settings
Press
Menu
and select
Setup > Audio
to go to audio settings.
The following settings are displayed
•
Night Mode
. This can be set to Off, On, or Comfort.
-
On
. Turning on night mode automatically lowers the intensity of bass sounds.
-
Comfort
. This setting smooths out high and low volume levels for all media and TV
channels. This prevents sudden changes in volume when you change media or a
channel.
•
HDMI Output
. By default, the digital output setting is LPCM. You can change it to LPCM
Multi-Ch or RAW. With the RAW setting, you need to connect a receiver to decode the
audio.
•
SPDIF Output
. The LPCM setting converts multi-channel audio into stereo. The RAW
setting plays digital audio without decoding.
Network Settings
Press
Menu
and select
Setup > Network
to go to the network settings. The only option on
this menu is Wired LAN Setup. By default this is set to DHCP IP (Auto). If you are using a
static IP address, you can change the setting here by selecting FIX IP (MANUAL).
