9. Click NEXT
If your device is a console, filtering mode is enabled for the device, which means
that the router blocks connections outside your distance radius to force your device
to use a host or server inside your radius. We recommend this setting for console
games.
If your device is a not console, filtering mode is disabled for the device, which means
that the router does not block connections outside of your distance radius. We
recommend this setting for most computer games that don’t require filtering.
10. Either override the suggested filter mode or click the CONTINUE button.
Your device is added.
11. Click the FINISH button.
The Add Device window closes.
Note: For information about using the device with the Geo Filter, see Use the Geo
Filter by Setting Your Home Area and the Distance Radius on page 46 or Use the
Geo Filter by Drawing Areas on page 49.
Remove a Device From the Geo Filter
You can remove a device from the Geo Filter.
To remove a device from the Geo Filter:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The Dashboard displays.
4. Select Geo-Filter.
The page that displays shows a map.
5. Move your mouse over the device that you want to remove.
6. When the DELETE button displays below the device, click the DELETE button.
The device is removed from the Geo Filter.
User Manual
56
Optimize Gaming and
Customize Quality of Service
Settings
Nighthawk Pro Gaming Router Model XR1000
