• Secured
. In secured mode, which is the default mode, the router inspects both
TCP and UDP packets.
• Open
. In open mode, the router inspects UDP packets only.
10. Click the
Apply
button.
Your settings are saved.
Set Up an IPv6 Pass Through Internet Connection
In pass-through mode, the router works as a Layer 2 Ethernet switch with two ports (LAN
and WAN Ethernet ports) for IPv6 packets. The router does not process any IPv6 header
packets.
To set up a pass-through IPv6 Internet connection:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter
http://www.routerlogin.net
.
A login window opens.
3. Enter the router admin user name and password.
The user name is
admin
. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 page displays.
5. From the
Internet Connection Type
menu, select
Pass Through
.
The page adjusts, but no additional fields display.
6. Click the
Apply
button.
Your settings are saved.
Set Up an IPv6 Fixed Internet Connection
To set up a fixed IPv6 Internet connection:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter
http://www.routerlogin.net
.
A login window opens.
User Manual
34
Specify Your Internet Settings
Nighthawk AX12 12-Steam AX6000 WiFi Router
