1-1
v5.0, January 2012
Chapter 1
Introduction
This chapter describes the features of the NETGEAR ProSafe VPN Firewall .
Key Features of the VPN Firewall
The ProSafe VPN Firewall with eight-port switch connects your local area network (LAN) to the
Internet through an external access device such as a cable modem or DSL modem.
The FVS318v3 is a complete security solution that protects your network from attacks and
intrusions. Unlike simple Internet sharing firewalls that rely on Network Address Translation
(NAT) for security, the FVS318v3 uses stateful packet inspection for Denial of Service attack
(DoS) protection and intrusion detection. The FVS318v3 allows Internet access for up to 253
users. The VPN firewall provides you with multiple Web content filtering options, plus browsing
activity reporting and instant alerts — both via e-mail. Parents and network administrators can
establish restricted access policies based on time-of-day, Web site addresses and address
keywords, and share high-speed cable/DSL Internet access for up to 253 personal computers. In
addition to NAT, the built-in firewall protects you from hackers.
With minimum setup, you can install and use the firewall within minutes.
The VPN firewall provides the following features:
•
Easy, Web-based setup for installation and management.
•
Content filtering and site blocking security.
•
Built-in eight-port 10/100 Mbps switch.
•
Ethernet connection to a WAN device, such as a cable modem or DSL modem.
•
Extensive protocol support.
•
Login capability.
•
Front panel LEDs for easy monitoring of status and activity.
•
Flash memory for firmware upgrade.
