ProSafe Quad WAN Gigabit Firewall FR538G Reference Manual
Router and Network Management
5-11
v1.0, November 2007
5.
Click
Apply
to have your changes take effect.
When accessing your firewall from the Internet enter
http://
and type your Firewall’s WAN IP
address into your browser, followed by a colon (:) and the custom port number. For example, if
your WAN IP address is 134.177.0.123 and you use port number 8080, type the following in your
browser:
http://134.177.0.123:8080
The router’s remote login URL is
http://<IP_address:port_number>
or
http://<FullyQualifiedDomainName:port_number>
.
Using a SNMP Manager
Simple Network Management Protocol (SNMP) lets you monitor and manage your router from an
SNMP Manager. It provides a remote means to monitor and control network devices, and to
manage configurations, statistics collection, performance, and security.
The SNMP Configuration table lists the SNMP configurations by:
•
IP Address
: The IP address of the SNMP manager.
•
Port
: The trap port of the configuration.
•
Community
: The trap community string of the configuration.
To create a new SNMP configuration entry:
1.
Select
Administration
>
SNMP
from the main menu. The
SNMP
screen will display.
2.
Under
Create New SNMP Configuration Entry,
enter the IP Address of the SNMP manager
in the
IP Address
field and the Subnet Mask in the
Subnet Mask
field.
•
If you want to allow only the host address to access the quad WAN gigabit firewall and
receive traps (for example, see
), enter an IP Address of, for example,
192.168.1.100 with a Subnet Mask of 255.255.255.
255
.
•
If you want to allow a subnet access to the quad WAN gigabit firewall through SNMP,
enter an IP address of, for example,192.168.1.100 with a Subnet Mask of 255.255.255.
0
.
The traps will still be received on 192.168.1.100, but the entire subnet will have access
through the community string.
Tip:
If you are using a dynamic DNS service such as TZO, you can identify the IP
address of your FR538G by running
tracert
from the Windows Run menu
option. For example, enter
tracert your FR538G.mynetgear.net,
and
the IP address that your ISP assigned to the FR538G will display.
Summary of Contents for ProSafe Quad WAN FR538G
