ProSafe Quad WAN Gigabit Firewall FR538G Reference Manual
5-12
Router and Network Management
v1.0, November 2007
•
If you want to make the quad WAN gigabit firewall globally accessible using the
community string, but still receive traps on the host, enter 0.0.0.0 as the Subnet Mask and
an IP Address for where the traps will be received.
3.
Enter the trap port number of the configuration in the
Port
field. The default is 162.
4.
Enter the trap community string of the configuration in the
Community
field.
5.
Click
Add
to create the new configuration. The entry will display in the
SNMP
Configuration
table.
6.
Click
Edit
in the
Action
column adjacent to the entry to modify or change the selected
configuration.
The
SNMP System Info
link displays the quad WAN gigabit firewall identification information
available to the SNMP Manager: System Contact, System Location, and System name.
To modify the SNMP System contact information:
1.
Click the
SNMP System Info
link. The
SNMP SysConfiguration
screen will display.
2.
Modify any of the contact information that you want the SNMP Manager to use.
3.
Click
Apply
to save your settings.
Figure 5-3
Summary of Contents for ProSafe Quad WAN FR538G
