ProSafe Quad WAN Gigabit Firewall FR538G Reference Manual
5-16
Router and Network Management
v1.0, November 2007
To upgrade router software:
1.
Select
Administration
>
Settings Backup and Firmware Upgrade
from the main menu.
The
Settings Backup and Firmware Upgrade
screen will display.
2.
In the
Router Upgrade
section, click
Browse
to locate the saved upgrade file.
3.
Locate the downloaded file and click
Upload.
This will start the software upgrade to your
quad WAN gigabit firewall router. This may take some time. At the conclusion of the upgrade,
your router will reboot.
4.
After the quad WAN gigabit firewall has rebooted, select
Monitoring > Router Status
to
confirm the new firmware version and to verify that your router now has the new software
installed.
Setting the Time Zone
Date, time and NTP Server designations can be input on the
Time Zone
screen. Network Time
Protocol (NTP) is a protocol that is used to synchronize computer clock times in a network of
computers Select
Administration
from the main menu and
Time Zone
from the submenu. The
Time Zone
screen will display.
To set Time, Date and NTP servers:
1.
Select Administration > Time Zone from the main menu. The Time Zone screen will display.
2.
From the
Date/Time
pull-down menu, select the Local Time Zone. This is required in order
for scheduling to work correctly. The quad WAN gigabit firewall includes a Real-Time Clock
(RTC), which it uses for scheduling.
3.
If supported in your region, check the
Automatically Adjust for Daylight Savings Time
radio box.
4.
Select a NTP Server option by checking one of the following radio boxes:
Warning:
Do not try to go online, turn off the router, shutdown the computer or do
anything else to the router until the router finishes the upgrade! When the
Test light turns off, wait a few more seconds before doing anything.
Note:
In some cases, such as a major upgrade, it may be necessary to erase the
configuration and manually reconfigure your router after upgrading it. Refer to
the Release Notes included with the software to find out if this is required.
Summary of Contents for ProSafe Quad WAN FR538G
