ProSafe Quad WAN Gigabit Firewall FR538G Reference Manual
Firewall Protection and Content Filtering
4-7
v1.0, November 2007
Order of Precedence for Rules
As you define new rules, they are added to the tables in the Rules menu as the last item in the list,
as shown in
:
For any traffic attempting to pass through the firewall, the packet information is subjected to the
rules in the order shown in the Rules Table, beginning at the top and proceeding to the bottom. In
some cases, the order of precedence of two or more rules may be important in determining the
disposition of a packet. For example, you should place the most strict rules at the top (those with
the most specific services or addresses). The
Up
and
Down
button allows you to relocate a defined
rule to a new position in the table.
Setting LAN WAN Rules
The Default Outbound Policy is to allow all traffic to the Internet to pass through. Firewall rules
can then be applied to block specific types of traffic from going out from the LAN to the Internet
(Outbound). The default policy of Allow Always can be changed to block all outbound traffic
which then allows you to enable only specific services to pass through the router.
To change the Default Outbound Policy:
Figure 4-1
Summary of Contents for ProSafe Quad WAN FR538G
