ProSafe Quad WAN Gigabit Firewall FR538G Reference Manual
3-2
LAN Configuration
v1.0, November 2007
Configuring the LAN Setup Options
The
LAN IP Setup
menu allows configuration of LAN IP services such as DHCP and allows you
to configure a secondary or “multi-home” LAN IP setup in the LAN. The default values are
suitable for most users and situations. These are advanced settings most usually configured by a
network administrator.
To modify your LAN setup:
1.
Select
Network Configuration
from the primary menu and
LAN Setup
from the submenu.
The
LAN Setup
screen will display.
2.
Enter the
IP Address
of your router (factory default:
192.168.1.1
). (Always make sure that the
LAN Port IP address and DMZ port IP address are in different subnets.)
3.
Enter the
IP Subnet Mask
. The subnet mask specifies the network number portion of an IP
address. Your router will automatically calculate the subnet mask based on the IP address that
you assign. Unless you are implementing subnetting, use 255.255.255.0 as the subnet mask
(computed by the router).
Figure 3-1
Summary of Contents for ProSafe Quad WAN FR538G
