ProSafe Quad WAN Gigabit Firewall FR538G Reference Manual
Firewall Protection and Content Filtering
4-9
v1.0, November 2007
LAN WAN Outbound Services Rules
You may define rules that will specify exceptions to the default rules. By adding custom rules, you
can block or allow access based on the service or application, source or destination IP addresses,
and time of day. The outbound rule will block the selected application from any internal IP LAN
address to any external WAN IP address according to the schedule created in the Schedule menu.
You can also tailor these rules to your specific needs (see
“Administrator Tips” on page 4-38
To create a new outbound service rule:
1.
Click
Add
under the Outbound Services Table. The
Add LAN WAN Outbound Service
screen will display.
..
2.
Complete the Outbound Service screen, and save the data (see
3.
Click
Reset
to cancel your settings and return to the previous settings.
4.
Click
Apply
to save your changes and reset the fields on this screen. The new rule will be
listed on the
Outbound Services
table.
LAN WAN Inbound Services Rules
This Inbound Services Rules table lists all existing rules for inbound traffic. If you have not
defined any rules, no rules will be listed. By default, all inbound traffic is blocked. Remember that
Note:
This feature is for Advanced Administrators only! Incorrect configuration will
cause serious problems.
Figure 4-3
Summary of Contents for ProSafe Quad WAN FR538G
