ProSafe Quad WAN Gigabit Firewall FR538G Reference Manual
Firewall Protection and Content Filtering
4-11
v1.0, November 2007
(Inbound). The default outbound policy can be changed to block all outbound traffic and enable
only specific services to pass through the router by adding an Outbound services Rule.
To change the Default Outbound Policy:
1.
Select
Security
from the main menu,
Firewall Rules
from the submenu and then select the
DMZ WAN Rules
tab. The
DMZ WAN Rules
screen will display.
2.
Click
Add
under the
Outbound Services
table. The
Add DMZ WAN Outbound Services
screen will display.
3.
Accept the default settings to block all services or select a specific service to block from the
Services pull-down menu.
4.
Click
Apply.
The Block Always rule will appear in the Outbound Services table. The rule is
automatically enabled.
Figure 4-5
Summary of Contents for ProSafe Quad WAN FR538G
