NETGEAR R6900 User Manual Download

Page: 229 / 249

Description

Field

Enter the end port number for the inbound connection.

Ending Port

Click the Apply button.

Your settings are saved and the rule is added to the Port Triggering Portmap Table on the Port
Forwarding / Port Triggering page.

Change a Port Triggering Rule

You can change an existing port triggering rule.

To change a port triggering rule:

Launch a web browser from a computer or WiFi device that is connected to the network.

Enter http://www.routerlogin.net.

A login window opens.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.

The Port Forwarding / Port Triggering page displays.

Select the Port Triggering radio button.

Manage Port Forwarding and Port Triggering

229

Nighthawk AC1900 Smart WiFi Router Model R6900

Summary of Contents for R6900


























































































































































































































































Search results

Summary of Contents for R6900

Reviews:

Related manuals for R6900

Brands by name

Popular brands

NETGEAR R6900, User Manual

Search results

Summary of Contents for R6900

Reviews:

Related manuals for R6900

Brands by name

Popular brands