ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
6-6
Virtual Private Networking Using IPsec
v1.0, July 2008
.
2.
Select
VPN Client
as your
VPN tunnel connection
.
The wizard needs to know whether you are planning to connect to a remote gateway or setting
up the connection for a remote client PC to establish a secure connection to this device.
3.
Create a
Connection Name
.
Enter an appropriate name for the connection. This name is not supplied to the remote VPN
client. It is used to help you manage the VPN settings.
4.
Enter a
Pre-shared Key
.
The key must be entered both here and on the remote VPN gateway, or the remote VPN Client.
This key length should be minimum 8 characters and should not exceed 49 characters. This
method does not require using a CA (Certificate Authority).
5.
{{Select the
WAN interface
to act as this endpoint of the VPN tunnel.}}
6.
Enter the public
Remote WAN IP
address of the gateway to which you want to connect.
Figure 6-4
New screenshot
