ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
LAN Configuration
3-13
v1.0, July 2008
Configuring Routing Information Protocol (RIP)
RIP (Routing Information Protocol, RFC 2453) is an Interior Gateway Protocol (IGP) that is
commonly used in internal networks (LANs). It allows a router to exchange its routing information
automatically with other routers, and allows it to dynamically adjust its routing tables and adapt to
changes in the network. RIP is disabled by default.
To configure RIP parameters:
1.
Select
Network Configuration > Routing
from the main/sub-menu.
2.
Click the
RIP Configuration
link to the right of the tab.
The RIP Configuration menu displays.
3.
From the
RIP Direction
pull-down menu, choose the direction in which the VPN Firewall
will send and receive RIP packets. The choices are:
•
None
. The VPN Firewall neither broadcasts its route table nor does it accept any RIP
packets from other routers. This effectively disables RIP.
Figure 3-7
OK