ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Wireless Configuration
4-13
v1.0, July 2008
Wireless Security Types and Settings
Configure the Wireless Security Types based on the level of security you need using one of the
following methods and print out the form provided to aid you in making your slections:
•
Print out the
“SSID and WEP/WPA Settings Setup Form” on page 4-14
•
To configure WEP encryption for Open Systems or Shared Key, see
“Configuring WEP”
on page 4-16
.
•
To configure WPA-PSK, see
“Configuring WPA-PSK” on page 4-18
.
•
To configure WPA2-PSK, see
“Configuring WPA2-PSK” on page 4-19
.
•
To configure WPA-PSK and WPA2-PSK, see
“Configuring WPA-PSK and WPA2-PSK”
on page 4-20
.
•
To configure WPA with RADIUS, see
“Configuring WPA with RADIUS” on page 4-21
.
•
To configure WPA2 with RADIUS, see
“Configuring WPA2 with RADIUS” on
page 4-22
.
•
To configure WPA and WPA2 with RADIUS, see
“Configuring WPA and WPA2 with
RADIUS” on page 4-23
Use the Wireless Security Type section in the Wireless Settings menu to select the desired security
method, but the balance of the security settings are set in the following main menus:
•
Go to
“Firewall Security and Content Filtering” in Chapter 5
for the
Security
menu settings
•
Go to
“Virtual Private Networking Using IPsec” in Chapter 6
for the
VPN IPsec
tunnel
settings
•
Go to
“Virtual Private Networking Using SSL” in Chapter 7
for the
VPN SSL
tunnel settings
•
Go to
“Managing Users, Authentication, and Certificates” in Chapter 8
for the
Users
menu
•
Go to
“Firewall and Network Management” in Chapter 9
for the
Administration
menu
