ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
5-8
Firewall Security and Content Filtering
v1.0, July 2008
To change the Default Outbound Policy, follow these steps:
1.
Click the LAN WAN Rules tab, shown in
Figure 5-1
.
2.
Change the
Default Outbound Policy
by choosing Block Always from the drop-down menu.
3.
Click
Apply
.
Creating a LAN WAN Outbound Services Rule
An outbound rule will block or allow the selected application from an internal IP LAN address to
an external WAN IP address according to the schedule created in the Schedule menu.
You can also tailor these rules to your specific needs (see
“Administrator Tips” on page 5-33
).
To create a new outbound service rule in the LAN WAN Rules tab:
1.
Click
Add
under the Outbound Services Table. The
Add LAN WAN Outbound Service
screen is displayed.
2.
Configure the parameters based on the descriptions in
Table 5-1 on page 5-3
.
Note:
This feature is for Advanced Administrators only! Incorrect configuration will
cause serious problems.
Figure 5-2
Need new screenshot
