ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
Using the Setup Wizard to Provision the STM in Your Network
2-11
v1.0, September 2009
Setup Wizard Step 2 of 11: Networking Settings
Enter the settings as explained in
Table 2-1 on page 2-11
, then click
Next
to go the following
screen.
Figure 2-11
Note:
After you have completed the steps in the Setup Wizard, you can make changes to
the network settings by selecting
Global Settings
>
Network Settings
. For more
information about these network settings, see
“Configuring Network Settings” on
page 3-1
.
Table 2-1. Setup Wizard Step 2: Network Settings
Setting
Description (or Subfield and Description)
Management Interface Settings
System Name
The name for the STM for purposes of identification and management. The
default name is the name of your model (STM150, STM300, or STM600).
DRAFT