ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
2-20
Using the Setup Wizard to Provision the STM in Your Network
v1.0, September 2009
Setup Wizard Step 6 of 11: Email Notification Server Settings
Enter the settings as explained in
Table 2-5 on page 2-20
, then click
Next
to go the following
screen.
Figure 2-15
Note:
After you have completed the steps in the Setup Wizard, you can make changes to
the administrator email notification settings by selecting
Global Settings
>
Notification server
. For more information about these settings, see
“Configuring
the E-mail Notification Server” on page 6-2
.
Table 2-5. Setup Wizard Step 6: Email Notification Server Settings
Setting
Description (or Subfield and Description)
Email Notification Server Settings
Show as Mail sender
A descriptive name of the sender for e-mail identification purposes. For
example, enter stm600notification@netgear.com.
Send Notifications to
The email address to which the notifications should be sent. Typically, this is the
e-mail address of a user with administrative privileges.
SMTP server
The IP address and port number or Internet name and port number of your
ISP’s outgoing e-mail SMTP server. The default port number is 25.
Note
: If you leave this field blank, the STM cannot send e-mail notifications.
DRAFT
