ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
Using the Setup Wizard to Provision the STM in Your Network
2-23
v1.0, September 2009
Setup Wizard Step 8 of 11: HTTP Proxy Settings
Enter the settings as explained in
Table 2-7 on page 2-23
, then click
Next
to go the following
screen.
Figure 2-17
Note:
After you have completed the steps in the Setup Wizard, you can make changes to
the security subscription update settings by selecting
Global Settings
>
HTTP
Proxy
. For more information about these settings, see
“Configuring the HTTP
Proxy Settings” on page 3-7
.
Table 2-7. Setup Wizard Step 8: HTTP Proxy Settings
Setting
Description (or Subfield and Description)
HTTPS Proxy Settings
Use a Proxy Server to
Connect to the Internet
If computers on the network connect to the Internet via a proxy server, select
the
Use a Proxy Server to Connect to the Internet
checkbox to specify and
enable a proxy server. Enter the following settings:
Proxy Server
The IP address and port number of the proxy server.
User Name
The user name that is used for the proxy server authentication.
Password
The password that is used for the proxy server authentication.
DRAFT