ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
6-42
Content Filtering and Optimizing Scans
v1.0, September 2009
To set Web access exception rules:
1.
Select
Application
Security
>
Block/Accept Exceptions
from the menu. The Block/Accept
Exceptions screen displays. This screen shows the Exceptions table, which is empty if you
have not specified any exception rules. (
Figure 6-18
shows three exception rules in the
Exceptions table as an example.)
2.
Under the Exceptions table, click the
add
table button to specify an exception rule. The Add or
Edit Block/Accept Exceptions screen displays.
Figure 6-18
Figure 6-19
