ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)
2-14
Basic Installation and Configuration
v2.0, September 2006
7.
Check the
Adjust for Daylight Saving Time
if your location uses daylight saving. The
default is no adjustment.
8.
Click
Apply
to save your Basic IP settings.
Wireless Settings
The following sections describe how to configure the wireless settings available in both the
80211.a and 80211.b/g modes.
Configuring 802.11a Wireless Settings
To configure the 80211.a wireless settings of your wireless access point:
1.
From the main menu under Setup, select Wireless Settings 11a. The Wireless Settings 11a
screen will display as shown in
Figure 2-9
below.
2.
Configure the Wireless LAN settings based on the following field descriptions:
•
Turn Radio On
. On by default, you can also turn off the radio to disable wireless access
through this device. This can be helpful for configuration, network tuning, or
troubleshooting activities.
Note:
You must have an Internet connection to get the current time.
Figure 2-9
