background image

User Manual for the NETGEAR 108 Mbps Wireless PCI Adapter WG311T

4-8

v4.0, February 2006

Wireless Security

Many networks use wireless security to encrypt wireless data communications. If you try to 
connect to a network with wireless security the Smart Wizard detects it. Before you can use that 
network you must set up the WG311T with exactly the same kind of wireless security settings. The 
WG311T supports the following types of wireless security:

Wi-Fi Protected Access 2 Pre-Shared Key (WPA2-PSK)

Wi-Fi Protected Access Pre-Shared Key (WPA-PSK)

Wired Equivalent Privacy (WEP)

For more information about wireless security, see the wireless reference document at:

http://documentation.netgear.com/reference/enu/wireless/index.htm 

In addition to the wireless security features, networks should use LAN network security features 
such as requiring a user name and password to access the shared resources in the network.

The procedures below explain how to configure the wireless encryption settings of your 
NETGEAR 108 Mbps Wireless PCI Adapter WG311T. 

Using Wireless Security Features

You can strengthen the security of your wireless connection by enabling Wired Equivalent Privacy 
(WEP) encryption of the wireless data communications. Or, you can use WPA-PSK (Wi-Fi 
Protected Access Pre-Shared Key) encryption. For more information about wireless security, see 
the Web link to 

“Wireless Communications:” in Appendix B

.

In addition to the WG311T wireless security features, you should also configure appropriate LAN 
network security features such as requiring a user name and password to access the shared 
resources in your network.

The procedures below show how to set up the WEP encryption settings of your NETGEAR 108 
Mbps Wireless PCI Adapter WG311T. 

Summary of Contents for WG311IS























































Reviews: