Reference Manual for the 54 Mbps Wireless Router WGR614 v6
4-8
Wireless Configuration
June 2004 202-10036-01
2.
Click
Wireless Settings
in the main menu of the WGR614 v6 firewall.
Figure 4-4: Wireless Settings menu
3.
Choose a suitable descriptive name for the wireless network name (SSID). In the SSID box,
enter a value of up to 32 alphanumeric characters. The default SSID is NETGEAR.
Note:
The SSID is case sensitive; NETGEAR is not the same as nETgear. Also, the SSID of
any wireless access adapters must match the SSID you configure in the 54 Mbps Wireless
Router WGR614 v6. If they do not match, you will not get a wireless connection to the
WGR614 v6.
4.
Set the Region. Select the region in which the wireless interface will operate.
5.
Set the Channel. The default channel is 11.
This field determines which operating frequency will be used. It should not be necessary to
change the wireless channel unless you notice interference problems with another nearby
wireless router or access point. Select a channel that is not being used by any other wireless
networks within several hundred feet of your firewall. For more information on the wireless
channel frequencies please refer to
“Wireless Channels” on page D-2
6.
For initial configuration and test, leave the Wireless Card Access List set to “Everyone” and
the Encryption Strength set to “Disabled.”
7.
Click
Apply
to save your changes.
