For the complete EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/
.
NETGEAR,the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc.and/or its subsidiaries in the United States and/or other countries. Information is subject to
change without notice. Other brand and product names are trademarks or registered trademarks of their
respective holders. © by NETGEAR, Inc. All rights reserved.
Intended for indoor use only in all EU member states, EFTA states, and Switzerland
December 2012
Preset Wireless Security
This product has a unique WiFi network name (SSID) and network key (password).
The default SSID and password are uniquely generated for every device (like a
serial number), to protect and maximize your wireless security. This information is on
the label on the bottom of the product.
NETGEAR recommends that you do not change the preset SSID or password. If you
do change the settings, the information on the bottom of the product does not apply.
Find the preset wireless settings on your router and record them here:
WiFi network name (SSID) ________________________________
Network key (password) __________________________________
If you change the preset wireless settings, record them here:
Wireless network name (SSID) _______________________________
Network key (password) _____________________________________
If necessary to retrieve or update your password, type
http://www.routerlogin.net
in a web browser, and log in using the
default user name (
admin
)
and password (
password
).
Select
Wireless Settings
to locate your wireless password.
Connect Wireless Devices to Your Router
Choose either the manual or Wi-Fi Protected Setup (WPS) method to add wireless
computers, and other devices to your wireless network.
Manual Method
1.
Open the software utility that manages your wireless connections on the
wireless device that you want to connect to your router (iPhone, laptop,
computer, gaming device). This utility scans for all wireless networks in your
area.
2.
Look for the preset NETGEAR wireless network name (SSID), and select it.
The SSID is on the product label on the bottom of the router.
Note:
If you changed the name of your network during the setup process, look
for that network name.
3.
Enter the preset password (or your custom password if you changed it), and
click
Connect
.
4.
Repeat steps 1–3 to add other wireless devices.
WPS Method
If your wireless device supports WPS (Wi-Fi Protected Setup)—NETGEAR calls
this method Push 'N' Connect—you might be prompted to press the WPS button on
the router instead of entering a password. If you are prompted to press the WPS
button:
1.
Press the
WPS
button
on the router.
2.
Within 2 minutes, press the
WPS
button on the client device, or follow the
WPS instructions that came with your wireless device to complete the WPS
process. The device is then connected to your router.
3.
Repeat this process to add other WPS wireless devices.
Note:
WPS does not support WEP security. If you try to connect a WEP client
to your network using WPS, it does not work.
Troubleshooting
The browser cannot display the web page.
•
Make sure that the computer is connected to one of the four LAN Ethernet ports,
or wirelessly to the router.
•
Make sure that the Wireless LED is lit.
•
Close and reopen the browser to make sure that the browser does not cache the
previous page.
•
Browse to
http://www.routerlogin.net
.
•
If the computer is set to a static or fixed IP address (this setting is uncommon),
change it to obtain an IP address automatically from the router.
After installing your device, locate the serial number on the label of your product
and use it to register your product at
https://my.netgear.com
. You must register your
product before you can use NETGEAR telephone support. NETGEAR recommends
registering your product through the NETGEAR web site. Visit
http://support.netgear.com
for product updates, additional documentation, and
support.
For the free Live Parental Controls centralized Internet site filtering software for your
router, visit
http://www.netgear.com/lpc
.
For additional features, including traffic metering, ReadySHARE, and guest access,
log in to your router at
http://www.routerlogin.net
.
NETGEAR recommends that you use only the official NETGEAR support
resources.
Internet
STATUS
GOOD
Network Map
Number of devices 16
Parental Controls
WiFi Connection
STATUS
Connected
Router Settings
Click here
ReadySHARE
Click here
Click here
Download the free Desktop
NETGEAR genie:
http://www.NETGEAR.com/genie
Automatically fix common network
problems and easily manage your
home network connections.
