11 / 18
www.netio-products.com
Controlling the output
DPA Standard Binary Output
The output of the PowerCable IQRF can be controlled and monitored using the “Standard Binary
Output” function of the DPA protocol. Commands and states conform to this standard.
Documentation according to DPA Interoperable:
IQRF-StandardBinaryOutput-V004
https://www.iqrfalliance.org/techdoc_files/IQRF-StandardBinaryOutput_V004.pdf
Output address: 0x01
Example: Switching the PowerCable output on in the mobile app
Example: Switching the PowerCable output on in the IQRF IDE
In the IQRF IDE, open these windows: Packet Inspector, Terminal, Terminal Log.
Message header (HEX):
NADR:
0x0004
PNUM:
0x4B
PCMD:
0x00
HWPID:
0x0003
Message data (HEX):
PDATA: 01.00.00.00.01