12 / 18
www.netio-products.com
Response PDATA if the command is correctly received: 04.00.4B.80.03.00.00.4A.00.00.00.00.
(Previous output state: off)
Example: Switching the PowerCable output off in the IQRF IDE
In the IQRF IDE, open these windows: Packet Inspector, Terminal, Terminal Log.
Message header (HEX):
NADR:
0x0004
PNUM:
0x4B
PCMD:
0x00
HWPID:
0x0003
Message data (HEX):
PDATA: 01.00.00.00.00
Response PDATA if the command is correctly received:
04.00.4B.80.03.00.00.47.01.00.00.00.
(Previous output state: on)