5 / 18
www.netio-products.com
Connecting to the IQRF network (Bonding)
Bonding must be started at the device to which the PowerCable IQRF should connect. Most often,
this is the IQRF Gateway. When testing, it could be the IQRF Coordinator controlled with the IQRF
IDE.
A device can be bonded in three ways:
•
SmartConnect – using the IQRF Smart Connect code (QR code) shown on the device.
•
Local Bonding – using some physical interaction with the device (a button on the PowerCable
IQRF).
•
AutoNetwork – automatically connects all available devices with the same network key.
Example: Connecting with the mobile app – SmartConnect
•
Connect the app to the IQRF Interoperable Gateway.
•
Click the blue circle with a plus symbol in the bottom right-hand corner to add a device into the
network using any of the available methods. To add a device using the SmartConnect method,
select “Smart Connect with QR Code”.
•
Point the phone’s camera so that the QR code is in focus and within the indicated area.