4
LED and button functions
OUTPUT LEDs [1] to [4]
Outputs 1 to 4
OUTPUT [1, 2, 3, 4] is lit green when
the output is switched on.
RJ45 – green
Network Link (lit) + Activity (flashes)
RJ45 – yellow
1x flash when the device starts
3x flash when the internal system
restarts
SETUP button
Switching all outputs
Output test:
Press the SETUP button 3x rapidly.
– If an output is On (1), it is switched off.
– If all outputs are Off (0), they are all
switched On (1).
Restoring factory defaults
When powering on the device, hold the
“SETUP” button pressed for about 10
seconds, until the yellow LED on the
RJ45 jack flashes 3 times.
