Doc Name
N9000 User’s Manual (Eng)
Part
R&D center
Doc Ver.
v1.1
Date
2013.12.16
Author
61
Note: Keep dirt and foreign objects out of the docking bays.
Do not short circuit any of the charging terminals (pins) in thedocking bays, as this action
could result in injury or property damage.
NetisIT recommends a stable, horizontal surface out of the way of:
inclement weather conditions,
extremely high concentrations of dust or windblown debris,
accidental knocks, bumps or other shocks to the docking bay.
Leave enough space at the dock power connector to ensure the power supply and power cable are
protected fromjostling, tugging or being disconnected by passing objects.
Do not place the Charging dock in a closed area withrestricted airflow.
Dock the N9000
The N9000 is inserted into the docking bay with the keypad facing forward.
Carefully press the N9000 straight down into the docking bay until the multi-pin connector at the base
of the N9000 clicks intoplace with the multi-pin charging connector at the bottom of the docking bay.
TheSmaterminal logopower LED illuminates of front N9000.
Undock the N9000
Remove the N9000 from the Cradle by pulling it straight up and out of the docking bay.
If necessary, brace the cradle with one hand while the other hand removes the N9000.
The Smaterminal logo power LED turns Off on the N9000.
Using the desk top cradle
Note : The power LED on the front of dock is illuminated when the dock is receiving AC power.
Batteries will not charge unless the Power LED is on.
