150Mbps Wireless-NHigh Gain Broadband Router
User Manual
Default gateway: It is provided by your ISP
Primary DNS: DNS server is used for resolve domain name. Your ISP will provides you
with at least one DNS IP address, input IP address of your DNS server in this field
Secondary DNS: Input IP address of backup DNS server, or you can leave this field
blank.
4.2.4.
Wireless Configuration
You can choose “Enable” or “Disable” to enable or disable the wireless function. The default
setting is “enable”. If you chose the “Disable” status, the router will become a wired
broadband router without wireless function, so be careful when you choose this status.
Figure 4-10
SSID: SSID (Service Set Identifier) is your wireless network's name shared among all
points in a wireless network. The SSID must be identical for all devices in the wireless
network. It is case-sensitive and must not exceed 32 characters. Make sure all points in
the wireless network have the same SSID. For added security, you should change the
default SSID to a unique name.
Region:Choose a correct region which fit your use environment.
Channel: Wireless router communicates to wireless cards in a particular channel, which
can reduce interference between different channels.
Authentication Type: Different authentication types use different encryption types, which
can encrypt wireless data to protect your wireless communication.
4.2.5.
MAC Clone
The WAN port of router has a unique MAC address assigned by manufacturer; it called as
“Default MAC”. The “Clone MAC” is used for some special situations; For example, ISP
only allows certain MAC address to access the Internet, thus you can modify your WAN
port’s MAC address in accord with the requirement of ISP, avoiding ISP’s detection.
33
