- ENGLISH -
- 72 -
Time setting menu
/------------------------/
/ Time setting /
/------------------------/
Set time.......:
<--
Set timezone...:
NTP options....:
From this menu the time and date of the device can be set as described in the following table.
Command
Description
Set time
To configure the time and date manually
Set timezone
To configure the time zone
NTP options
To configure clock synchronization with an NTP server
Pressing the “ENTER” key corresponding to the “Set time” command displays a screen like the one
shown below.
Current date is Wed Jun 15 08:09:40 GMT 2005
Insert new date and clock time in this form:
MMDDYYYYHHMMSS
06152005081000
Current date is Wed Jun 15 08:10:00 GMT 2005
Enter the date and time in the format shown, then press the ENTER
key and then “ESC” to exit.
Pressing the “ENTER” key corresponding to the “Set timezone” command displays a screen like
the one shown below.
Current date is Thu Jun 16 12:15:25 GMT 2005
Available Timezones:
GMT (+0000) IET (-0500) CTT (+0800) VST (+0700) SST (+1100)
PST (-0800)* MST (-0700)* JST (+0900) AST (-0900)* EAT (+0300)
ECT (+0100)* NET (+0400) EET (+0200)* BET (-0300)* PLT (+0500)
PNT (-0700) IST (+0530) CST (-0600)* PRT (-0400) ACT (+0930)
MET (+0330)* ART (+0200)* AET (+1000)* AGT (-0300) MIT (-1100)
NST (+1200)* HST (-1000) CNT (-0330)* EST (-0500)* BST (+0600)
CAT (+0200)
* denotes a time zone that uses Daylight Savings
Insert new timezone:
ECT
Current date is Thu Jun 16 14:15:31 ECT 2005
Enter the time zone selected from those shown, then press the ENTER
key and then “ESC” to exit.
