NG800
User Manual for NRSW version 4.5.0.100
Parameter
GNSS Server Configuration
Allow clients from
Specifies where clients can connect from, can be either
everywhere
or from a specific network
Clients start mode
Specifies how data transferal is accomplished when a client connects.
You can specify
on request
which typically requires an
R
to be sent.
Data will be sent instantly in case of
raw
mode which will provide
NMEA frames or
super-raw
which includes the original data of the
GPS receiver. If the client supports the JSON format (i.e. newer
libgps is used) the
json mode
can be specified.
Please consider to restrict access to the server port, either by a specifying a dedicated client network
or by using a firewall rule.
72
