248
•
auto
- The device will scan for standard telephone ser vice (POTS). If it finds POTS, it dis-
ables metallic termination. If it does not find POTS during the search period, then metal-
lic termination is enabled.
•
disabled
- There is no POTS detection, and metallic termination is disabled.
•
always_on
- The device will scan for POTS for information only. Metallic termination is
always enabled.
Domain Name System Settings
Domain Name System (DNS) is an information ser vice for TCP/IP networks that uses a
hierarchical naming system to identify network domains and the hosts associated with
them. You can identify a primar y DNS ser ver and one secondar y ser ver.
Common Commands
set dns domain-name
domain-name
Specifies the default domain name for your network. When an application needs to resolve
a host name, it appends the default domain name to the host name and asks the DNS
ser ver if it has an address for the “fully qualified host name.”
set dns primary-address
ip_address
Specifies the IP address of the primar y DNS name ser ver.
set dns proxy-enable
This allows you to disable the default behavior of acting as a DNS proxy. The default is
on
.
set dns secondary-address
ip_address
Specifies the IP address of the secondar y DNS name ser ver. Enter
0.0.0.0
if your network
does not have a secondar y DNS name ser ver.
Dynamic DNS Settings
These commands are suppor ted beginning with Firmware Version 7.4.2.
Dynamic DNS suppor t allows you to use the free ser vices of
www.dyndns.org
. Dynamic
DNS automatically directs any public Internet request for your computer's name to your cur-
Summary of Contents for 3342
