background image

283

CONFIG Commands

SNMP Notify Type Settings

SNMP Notify Type is suppor ted beginning with Firmware Version 7.4.2.

set snmp notify type [ v1-trap | v2-trap | inform ]

Sets the type of SNMP notifications that the system will generate: 

v1-trap

 – This selection will generate notifications containing an SNMPv1 Trap 

Protocol 

Data Unit

 (PDU)

v2-trap

 – This selection will generate notifications containing an SNMPv2 Trap PDU

inform

 – This selection will generate notifications containing an SNMPv2 InformRe-

quest PDU.

System Settings

You can configure system settings to assign a name to your Netopia Gateway and to spec-
ify what types of messages you want the diagnostic log to record.

set system name 

name

Specifies the name of your Netopia Gateway. Each Netopia Gateway is assigned a name as 
par t of its factor y initialization. The default name for a Netopia Gateway consists of the 
word “Netopia-3000/XXX” where “XXX” is the serial number of the device; for example, 
Netopia-3000/9437188. A system name can be 1 – 255 characters long. Once you have 
assigned a name to your Netopia Gateway, you can enter that name in the 

Address 

text field 

of your browser to open a connection to your Netopia Gateway.

☛  

NOTE:

Some broadband cable-oriented Ser vice Providers use the 

System Name

 as 

an impor tant identification and suppor t parameter. If your Gateway is par t of 
this type of network, do 

NOT

 alter the System Name unless specifically 

instructed by your Ser vice Provider.

Summary of Contents for 3342
































































































































































































































































































































































Reviews: