289
CONFIG Commands
set security state-insp eth B option on
• Type the command to enable the router to drop fragmented packets
set security state-insp eth B deny-fragments on
3.
Enabling syslog:
• Type
config
• Type the command to enable syslog
set system syslog option on
• Set the IP Address of the syslog host
set system syslog host-nameip <ip-addr>
(example:
set system syslog host-nameip 10.3.1.1
)
• Enable/change the options you require
set system syslog log-facility local1
set system syslog log-violations on
set system syslog log-accepted on
set system syslog log-attempts on
4.
Set NTP parameters
• Type
config
• Set the time-zone – Default is 0 or GMT
set system ntp time-zone <zone>
(example:
set system ntp time-zone –8
)
• Set NTP ser ver-address if necessar y (default is 204.152.184.72)
set system ntp server-address <ip-addr>
(example:
set system ntp server-address 204.152.184.73
)
• Set alternate ser ver address
set system ntp alt-server-address <ip-addr>
5.
Type the command to save the configuration
• Type
save
• Exit the configuration inter face by typing
exit
• Restar t the router by typing
restart
The router will reboot with the new configuration in effect.
Summary of Contents for 3342
