[ENG] NetPing 2 IP PDU ETH 53R14 & NetPing 2 IP PDU GSM3G 203R15, User guide -[ENG][2PWR] Features of Local Controls,
LEDs, and Sockets on a Case of the Device
[ENG][2PWR] Features of Local Controls, LEDs, and Sockets on a Case of the Device
–
•
•
•
•
•
•
•
Element
Description
GSM
antenna
connector
A socket for connecting an external GSM antenna. SMA with a connector. It is included only in the
model
NetPing 2 IP PDU GSM3G 203R15
, with a built-in GSM modem.
Link
Ethernet LED.
Glows if there is a link;
Blinks when receiving packages.
CPU
Operation LED.
Glows continuously if a device is powered on;
Blinks 5-6 times when a device is switched on (while a microprogram is loading);
Blinks 15-20 times when resetting parameters of a device to default parameters;
Blinks sometimes when a device sends packages to the Ethernet;
Blinks intensely when shows a firmware update mode.
SIM card
slot
A slot to insert a SIM card of the format Mini-SIM. It is included only to the model
NetPing 2 IP PDU
GSM3G 203R15
, that has a built-in GSM modem.
Reset
A Reset button to reset a device to default parameters (it is done when the Reset button is pressed
while a device is powered on). The external battery module should be switched off.
External
battery
connector
A connector for NetPing external battery module 85m2.
Ethernet
ports
2x10/100 BASE-TX, 2 ports are an uncontrolled switch of the 2nd level, and the third port of a
switch is connected to the CPU of the device.