[ENG] NetPing 2 IP PDU ETH 53R14 & NetPing 2 IP PDU GSM3G 203R15, User guide -[ENG][2PWR] Overview and Key Features
[ENG][2PWR] Overview and Key Features
–
[ENG][2PWR] Overview and Key Features
It is possible to connect up to two power consumers of the total capacity of 1500W to a device using controlled
electric outlets. To be protected from a short circuit in load and/or exceeding the maximum permissible power, the
device is equipped with an automatic built-in resettable fuse. Spreading the load capacity between the two
channels is random. The load connected to the device is controlled using the own web interface, SNMP protocol,
using HTTP API and by SMS (for a
NetPing 2 IP PDU GSM3G 203R15 device
with a built-in GSM modem). The device
has a feature of a «watchdog» that allows to reboot connected equipment automatically if it freezes or according to
a previously specified schedule. Electric load of each of the two channels is controlled independently from each
other, at the same time, individual settings are possible for any of these channels.
Appearance
General appearance. A photo represents a model
NetPing 2 IP PDU GSM3G 203R15
Front view