[ENG] NetPing Infra Red Universal Remote Control 3802, User guide -[ENG] [IR3801] Connectors and Indicators
[ENG] [IR3801] Connectors and Indicators
–
Element
Function
Ethernet ports
2
x10/100 BASE-TX, a built-in unmanaged L2 switch. PoE in 30-50V on both ports.
If PoE is applied to one, then it passes through, regardless of whether the device
is powered from PoE or not!
DC in
DJK-02A under the pin of 2,1 mm "+" power in the centre. The range is 10-12V.
Back panel
Element
Function
PWR
Device operation indicator. It lights up when power is on.
ACT
When transmitting an IR command, it does not light up, flashes 1 time.
If the command record contains garbage, it is lit for 1 s.
When a write command is sent, IR - blinks quickly.
When a command is received and successfully recorded, it stops
blinking and goes out.
Too long waiting for an IR command, timeout (> 20s) - stops blinking
and goes out.
IR recording buffer overflow - stops blinking, lights up for 1s, goes out.
RESET
A button to reset the device to factory settings (it resets when the
button is held down when the device is turned on).
