[ENG] NetPing Infra Red Universal Remote Control 3802, User guide -[ENG] [IR3801] Installation and Connection
[ENG] [IR3801] Installation and Connection
–
•
•
[ENG] [IR3801] Installation and Connection
Step 1. Initial turning-on
1. Connect the device to the local network and power the device using a 12V DC power supply (PoE is disabled by
default).
2. To configure the device, open the device web interface at
using a browser (it is advisable to
use the latest version of Google Chrome browser). For authorization use:
Login:
visor
Password:
ping
3. If you need, you can change the IP address to a free one from the pool of your network and configure the device
as needed, following the documentation:
3.2. [DKSF 38.1 IU] Where Can I Change the Settings of the Network
Step 2. IR commands recording
1. Direct the IR remote control, the commands from which you want to record to the IR receiver of the device
(incoming arrows).
