Netscape NETSCAPE ENTREPRISE SERVER 6.0 - ADMINISTRATOR Administrator'S Manual Download | Manualshive

Page: 187 / 470

background image

Limiting Access to Areas of Your Server

Chapter

8

Controlling Access to Your Server

187

The following procedures are described in this section:

•

Restricting Access to the Entire Server

•

Restricting Access to a Directory (Path)

•

Restricting Access to a URI (Path)

•

Restricting Access to a File Type

•

Restricting Access Based on Time of Day

•

Restricting Access Based on Security

Restricting Access to the Entire Server

You may wish to allow access to users in a group called who access the server from
computers in a subdomain. For instance, you may have a server for a company
department that you only want users to access from computers in a specific
subdomain of your network.

Using the steps described for setting access control for a server instance, you
would:

1.

Use the Server Manager to select the server instance.

2.

Choose the Preferences tab.

3.

Click the Restrict Access link.

4.

Choose the ACL File to edit.

5.

Pick the entire server resource, and click Edit Access Control.

6.

Add a new rule to deny access to all.

7.

Add another new rule to allow access to a specific group.

8.

Enter a wildcard pattern for the host names of the computers to be allowed.

For example,

*.employee.example.com

9.

Unselect Continue.

10.

Submit and Apply your changes.

«
...
185
186
187
188
189
...
»

Summary of Contents for NETSCAPE ENTREPRISE SERVER 6.0 - ADMINISTRATOR























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NETSCAPE ENTREPRISE SERVER 6.0 - ADMINISTRATOR

Brand: ExtraHop Pages: 5

NovaScale T820 F2

Brand: Bull Pages: 34

Brand: I-O DATA Pages: 49

Ultrastar Serv24 S2122-N24-4

Brand: HGST Pages: 36

SuperServer E300-9C

Brand: Supermicro Pages: 113

Brand: DNP Pages: 93

Brand: Acard Pages: 43

PUZZLE-IN004 Series

Brand: IEI Technology Pages: 102

376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch

Brand: HP Pages: 169

Brand: Fujitsu Pages: 44

PRIMERGY RX900 S2

Brand: Fujitsu Pages: 114

PRIMERGY RX800 S2

Brand: Fujitsu Pages: 66

Brand: Fujitsu Pages: 8

Brand: Fujitsu Pages: 99

PRIMERGY SX05 S1

Brand: Fujitsu Pages: 52

PRIMERGY RX600 S5

Brand: Fujitsu Pages: 82

PRIMERGY ServerView Suite

Brand: Fujitsu Pages: 62

PRIMERGY RX800 S2

Brand: Fujitsu Pages: 149

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands