manualshive.com logo in svg

Netscape NETSCAPE ENTREPRISE SERVER 6.0 - ADMINISTRATOR, Administrator'S Manual

Download the Netscape Enterprise Server 6.0 Administrator's Manual for free on our website. This comprehensive manual provides all the information you need to effectively manage and maintain your server. Ensure smooth operation by accessing the manual from 88.208.23.73:8080.

Share
Download
background image

Using Quality of Service

Chapter

10

Monitoring Servers

219

At 1 second, the bandwidth is calculated for the 10th time (1000 milliseconds/ 100 
milliseconds). The total traffic is 5000 bytes, which is divided by 30 seconds. The 
bandwidth is 5000/30 = 166 bytes per second. 

At 30 seconds, the bandwidth is calculated for the 300th time. The total traffic is 
5000 bytes, which is divided by 30 seconds. The bandwidth is 5000/30 = 166 bytes 
per second. 

At 32 seconds, the bandwidth is computed again for the 320th time. The traffic is 
now 0 (since the one connection that generated traffic is too old to be counted), 
divided by 30, gives a bandwidth of 0 bytes/second. 

Setting Up Quality of Service

To configure the quality of service settings for a server instance or a class of virtual 
servers, you need to configure the settings in through the user interface. To actually 
enforce your quality of service settings, you must also set up Server Application 
Functions (SAFs) in your 

obj.conf

 file.

To configure quality of service, follow these steps:

1.

From the Server Manager, click the Monitor tab.

2.

Click Quality of Service.

A page appears listing general settings for quality of service, followed by a list 
containing the server instance as a whole and each class of virtual servers.

3.

To enable quality of service as a whole, click Enable.

By default quality of service is disabled. Enabling quality of service increases 
server overhead slightly.

4.

Choose the Recompute Interval.

The recompute interval is the number of milliseconds between each 
computation of the bandwidth for all servers, classes, and virtual servers. The 
default is 100 milliseconds.

5.

Choose the Metric Interval.

The metric interval is the interval in seconds during which the traffic is 
measured. The default is 30 seconds. All bandwidth measured during this time 
is averaged to give the bytes per second.

Summary of Contents for NETSCAPE ENTREPRISE SERVER 6.0 - ADMINISTRATOR























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NETSCAPE ENTREPRISE SERVER 6.0 - ADMINISTRATOR

Canon ColorPASS-Z5000 Getting Started preview
ColorPASS-Z5000
Brand: Canon Pages: 130
IBM 8832 Deployment Manual preview
8832
Brand: IBM Pages: 54
IBM Enterprise Server S80 User Manual preview
Enterprise Server S80
Brand: IBM Pages: 282
IBM Power 570 Technical Overview And Introduction preview
Power 570
Brand: IBM Pages: 142
IntesisBox Modbus Server-FC330A Installation Manual preview
Modbus Server-FC330A
Brand: IntesisBox Pages: 5
Buffalo LS520D Series Quick Setup Manual preview
LS520D Series
Brand: Buffalo Pages: 2
Lucent Technologies Definity 8510T User Manual preview
Definity 8510T
Brand: Lucent Technologies Pages: 85
IBM BladeCenter HS20 Type 8843 Installation And User Manual preview
BladeCenter HS20 Type 8843
Brand: IBM Pages: 112
Supermicro SuperServer E300-9A-4C User Manual preview
SuperServer E300-9A-4C
Brand: Supermicro Pages: 109
ORiNG IDS-5042 Series User Manual preview
IDS-5042 Series
Brand: ORiNG Pages: 67
Silex technology PRICOM PRICOM C- 5100 User Manual preview
PRICOM PRICOM C- 5100
Brand: Silex technology Pages: 7
Olive Olive OPUS N5 User Manual preview
Olive OPUS N5
Brand: Olive Pages: 24
Epson C12C823912 - Net 2 Print Server Start Here Manual preview
C12C823912 - Net 2 Print Server
Brand: Epson Pages: 20
Epson C823622A - Interface Type B Print Server Product Support Bulletin preview
C823622A - Interface Type B Print Server
Brand: Epson Pages: 3
Epson C12C800WN (Net 802.11b Wireless Print Server) Specifications preview
C12C800WN (Net 802.11b Wireless Print Server)
Brand: Epson Pages: 2
Epson C32C824461 - UB R03 Print Server Technical Reference Manual preview
C32C824461 - UB R03 Print Server
Brand: Epson Pages: 86
Epson C82362 Administrator'S Manual preview
C82362
Brand: Epson Pages: 279
Epson C823622A - Interface Type B Print Server Brochure preview
C823622A - Interface Type B Print Server
Brand: Epson Pages: 2

Brands by name

Popular brands

Load more brands