Netscape NETSCAPE ENTREPRISE SERVER 6.0 - ADMINISTRATOR Administrator'S Manual Download | Manualshive

Page: 97 / 470

background image

Requesting and Installing Other Server Certificates

Chapter

5

Securing Your Enterprise Server

97

7.

Enter your identification information.

The format of this information varies by CA. For a general description of these
fields, alist of Certificate Authorities is available through both Server
Administrator, and Server Manager Security Pages under Request a
Certificate. Note that most of this information usually isn’t required for a
certificate renewal.

8.

Double-check your work to ensure accuracy.

The more accurate the information, the faster your certificate is likely to be
approved. If your request is going to a certificate server, you’ll be prompted to
verify the form information before the request is submitted.

9.

Click OK.

10.

For the Server Manager, click Apply, and then Restart for changes to take
effect.

The server generates a certificate request that contains your information. The
request has a digital signature created with your private key. The CA uses a digital
signature to verify that the request wasn’t tampered with during routing from your
server machine to the CA. In the rare event that the request is tampered with, the
CA will usually contact you by phone.

If you choose to email the request, the server composes an email message
containing the request and sends the message to the CA. Typically, the certificate is
then returned to you via email. If instead you specified a URL to a certificate server,
your server uses the URL to submit the request to the Certificate Server. You might
get a response via email or other means depending on the CA.

The CA will notify you if it agrees to issue you a certificate. In most cases, the CA
will send your certificate via email. If your organization is using a certificate server,
you may be able to search for the certificate by using the certificate server’s forms.

Once you receive the certificate, you can install it. In the meantime, you can still use
your server without SSL.

NOTE

Not everyone who requests a certificate from a commercial CA is
given one. Many CAs require you to prove your identity before
issuing you a certificate. Also, it can take anywhere from one day to
two months to get approval. You are responsible for promptly
providing all the necessary information to the CA.

«
...
95
96
97
98
99
...
»

Summary of Contents for NETSCAPE ENTREPRISE SERVER 6.0 - ADMINISTRATOR























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NETSCAPE ENTREPRISE SERVER 6.0 - ADMINISTRATOR

UniServer R6900 G5

Brand: H3C Pages: 83

5big - Network NAS Server

Brand: LaCie Pages: 9

Brand: LaCie Pages: 14

Link Manager 4010-43

Brand: Point Six Pages: 131

Brand: Omega Pages: 16

iDataPlex dx320 6385

Brand: IBM Pages: 60

301297U - 1TB Ethernet Disk XP Embedded Network Attached...

Brand: LaCie Pages: 67

Thin Client 166

Brand: Tangent Pages: 2

Express5800/R320f-E4

Brand: NEC Pages: 88

TS-269L TurboNAS

Brand: QNAP Pages: 6

6180DN - Phaser Color Laser Printer

Brand: Xerox Pages: 2

Brand: XtendLan Pages: 27

DIRECTORY SERVER 8.0

Brand: Red Hat Pages: 128

Industrial Ethernet Serial Server LES401A LES401A

Brand: Black Box Pages: 2

Brand: Black Box Pages: 8

Terminal Server

Brand: Black Box Pages: 131

Horizone Mini IN00M02WEB

Brand: Eelectron Pages: 118

OfficeConnect 3C19500

Brand: 3Com Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands