11
How to Stabilize the Enclosure
Stabilizing kits
The
AR1000A
and
AR1001A
enclosures are shipped with the
detachable feet installed. American Power Conversion offers
two additional products for stabilizing enclosures:
• Stabilizer Plate Kit (
AR8111
)—
one front plate, two side
plates, and mounting hardware for attaching to the
enclosure frame. Stabilizer plates may also be bolted to the
floor to add stability.
• Bolt Down Bracket Kit
(AR8112
)
—four brackets and
mounting hardware for attaching to the enclosure frame on
the sides (exterior or interior). These brackets must be
bolted to the floor.
If you use one of these kits, you will first need to remove the
detachable feet.
How to remove
the feet
1. Loosen the screws located just under the cover on each side
of the foot. To loosen, use a 10mm open-end wrench and
turn the wrench clockwise. Do not remove the hex screws.
Continued on next page
Summary of Contents for AR1000A
Page 1: ...NetShelter Premium Enclosure AR1000A AR1001A AR1100A User s Manual...
Page 6: ......
Page 42: ......
Page 43: ......