25
Braces
Each side of the enclosure has two horizontal braces between
the vertical frame posts. These adjustable braces support the
mounting rails and are available for managing cables.
How to move a
brace
1. Use the 5mm Allen wrench (included) to remove the four
socket-head screws that are holding the brace to the frame
posts.
2. Remove the caged nuts from the frame post. (See page 15.)
3. Locate the new position for the brace and secure the brace
to the frame posts:
a. Insert a caged nut into the appropriate holes at the new
position on the frame post.
b. Place the brace at the new position and insert a socket-
head screw through the brace, frame post, and caged nut.
c. Tighten the screw to secure the brace to the frame post.
Summary of Contents for AR1000A
Page 1: ...NetShelter Premium Enclosure AR1000A AR1001A AR1100A User s Manual...
Page 6: ......
Page 42: ......
Page 43: ......