15
Follow the procedure below to turn off the system:
Firstly shut down the computer; after the computer is powered off, press and
hold Netstor chassis’ front LED button for three seconds until it shows no light
for powering off the NA211A-G3.
If you have any questions, please contact your regional distributor,
or Netstor Technology, Taiwan.
Netstor Technology Co. Ltd.
www
.
netstor
.
com
.
tw
6F, No. 1, Alley 16, Lane 235, Baoqiao Rd., Xindian District,
New Taipei City 231-45, Taiwan, R.O.C.
sales@
netstor.com.tw
+886 2 2917 1500
6. After the Windows drivers for the third-party PCIe cards within NA211A-G3
are installed on the Windows operating system, the PCIe cards in Netstor
unit will work properly with the host computer.
5. Verify the drivers for the third-party PCIe cards in Netstor unit are installed on
macOS. As seeing all the PCIe cards are listed in PCI section at the last step,
there will be a section
Driver Installed
indicating the status of PCIe cards’ drivers.
If it shows “No” for the status, find and install the Thunderbolt-aware driver for
the PCIe card, and then the status will become “Yes” to mean the driver of the
PCIe card is installed properly.