4. At System Information pane, click
PCI
in the left column, and the third-party PCIe
card installed in the NA221A-G3 enclosure will be shown in the information area.
14
Conduct the method below to turn off the system:
Power off the computer, and the Netstor unit will power off along automatically.
As the Netstor unit is powered off, Netstor enclosure’s front power-on indicator
LED will not show light.
If you have any questions, please contact your regional distributor,
or Netstor Technology, Taiwan.
Netstor Technology Co. Ltd.
www
.
netstor
.
com
.
tw
6F, No. 1, Alley 16, Lane 235, Baoqiao Rd., Xindian District,
New Taipei City 231-45, Taiwan, R.O.C.
sales@
netstor.com.tw
+886 2 2917 1500
6. After the macOS driver for the third-party PCIe card in NA221A-G3 is installed
on the macOS operating system, the PCIe card in Netstor unit will work
properly with the host computer.
5. Verify the driver for the third-party PCIe card in Netstor unit is installed on
macOS. As seeing the PCIe card is listed in PCI section at the last step,
there will be a section
Driver Installed
indicating the status of PCIe card’s
driver. If it shows “No” for the status, find and install the macOS driver for
the PCIe card, and then the status will become “Yes” to mean the driver of
the PCIe card is installed properly.
