NV-600W Managed Wireless VDSL2 Router USER’S MANUAL Ver. A3
17
2.6.1 Connect the NV-600L and the NV-600W to the Line
The objective for VDSL2 is to pass high speed data over a twisted pair cable. In the setup, connect NV-600L to NV-600W
through phone wire (24~26 AWG) or line simulator or any other hardware representation of a cable network, with or without
noise injection and crosstalk simulations.
2.6.2 Connect the NV-600L and the NV-600W to LAN Devices
In the setup, usually an Ethernet tester serves as a representation of the LAN side as well as a representation of the WAN side.
2.6.3 Run Demos and Tests
The Ethernet tester may send data downstream as well as upstream. It also receives the data in order to check the integrity of
the data transmission. Different data rates can be tested under different line conditions.
2.6.4 Wireless Basics
In recent years, the market for wireless communications has enjoyed tremendous growth. Wireless technology now reaches or
is capable of reaching virtually every location on the surface of the earth. Hundreds of millions of people exchange information
every day via wireless communication products. Anyone can bring a built-in WLAN client Smartphone, tablet or notebook into a
meeting room for a conference without laying a clot of LAN cable or drilling holes everywhere. Wireless LAN enables high
mobility so WLAN users can simultaneously access all LAN facilities just like on a wired LAN as well as Internet access. The
NV-600W is equipped with a wireless LAN interface compliant with the standard IEEE 802.11n protocol. To boost its
performance even further, the NV-600W is also loaded with an advanced wireless technology to lift up the data rate up to 300
Mbps. You can finally smoothly enjoy a wide range of apps on your smart phone, tablet or smart TV.
